| WL-POM-C-GEN | Standard Viscosity (General Purpose) | Stabilizers | High rigidity, Low friction, Excellent fatigue resistance, Good dimensional stability | Gears, bushings, rollers, conveyor belt parts, pump components, zippers |
| WL-POM-C-GEN | High Flow Grade | Stabilizers | Faster molding cycles, Easy fill for thin-wall/complex molds, Slightly lower mechanicals | Thin-walled parts, complex geometry parts, high-volume production (e.g., lighter casings) |
| WL-POM-C-IM | Impact Modified (Toughened Grade) | Impact Modifier, 5-15% | Significantly improved impact toughness (esp. notched), Reduced rigidity/hardness | Snap-fit assemblies, clips, fasteners, ski bindings, seatbelt buckles |
| WL-POM-C-GEN | PTFE Lubricated Grade | PTFE Lubricant, 10-20% | Extremely low coefficient of friction, Enhanced wear resistance (esp. dry friction) | Low friction gears, bearings, sliding elements, actuator parts, self-lubricating precision parts |
| WL-POM-C-UV | UV Stabilized Grade | UV Stabilizer, 1-2% | Improved weather resistance under outdoor exposure, Delays yellowing/degradation | Automotive interior/exterior parts (limited use), window hardware, outdoor equipment parts |
| WL-POM-C-GF25 | Glass Fiber Reinforced Grade | Glass Fiber, 10-25% | Increased rigidity/strength/creep resistance, Higher HDT, Friction coefficient may increase | Structural parts needing higher rigidity, levers, brackets, gears (needing higher load capacity) |
